ICU bed with medical pendant arms and digital weig

1, saving space ICU bed with the integration of medical pendant arms system, it is available for hospital to save valuable medical space to service more patients at a lower cost. 2, digital weighing system With the use of high-precision weighing sensor, the weighing system reaches precision up to 10g. Doctor and nurse can real time monitor patients current weight and weight change. The system also can be connected with the hospital's LAN, then to be a comprehensive electronic management system. 3, medical pendant arms system The bed is equipped with medical pendant arms. This pendant is structured with separate dry and wet sections, with transfusion pump shelf in the wet section and monitor machine in the dry section. It can be rotated in a variety of configurations as well to meet emergency care specific needs. 4, multi-position adjustment Driven by the electromotion through reliable static motors, the bed can change the height of the pallet, the inclination angle of backrest segment and legrest segment. Meanwhile it can be adjusted to CPR position, fowler position, trendelenburg positon and reverse trendelenburg position. Electric board turn over function meets the special need of caregivers and patients. 5, flexible movement With the medical casters of high stability and central braking system, the bed can be moved smoothly or be braked easily. Therefore, patients with critical illness can be transferred conveniently if necessary. Meanwhile, it is also very helpful for doctors to form a large-scale ICU immediately to salvage patients timely in disastrous accidents. Specification Model PY-ICU1Length2550mmWidth1100mmHeigth of pendant arms to floor1700mmDeck height(low position)450mm0 250°0 150°CasterΦ150mm, central braking systemHead-boardPESide railPETotal WeightAbout 200kgBack Section Lift0 85°Leg Section Turn0 45°Height Adjustment300mmRight or Left Lateral Turn Over0 45° Supply Power AV220V/50Hz 100VAWeighing Display Control SystemMax Measuring Resolution200000/mVPrecision20000/mVSenor Exciting Voltage5V DCInput Signal-30mV +30mVNor-Linear±0.001%F.SSample Frequency100Hz50Hz25Hz12.5Hz6.25HzZero Track+/-0.5d+/-1.0d+/-2.0d+/-3.0dZero Track Rate0.5d/2s0.5d/s1.0d/s1.5d/s2.0d/s3.0d/s4.0d/s6.0d/sManually Zero Set+/-4%Max+/-50%MaxZero Set at Power On+/-2%Max+/-10%Max+/-20%MaxStatic Measure Limit+/-0.05d+/-0.1d+/-0.25d+/-0.5d+/-1.0d+/-2.0d+/-4.0dStatic Measure Time0.1s9.9sWorking Volt9V DC 450mAOperating Temperature-20 60Operating Humidity10% 85%