HX-6288高绩效的工程硅胶密封

HX-6288 HighPerformance Engineering Silicone Sealant The Main Uses 1. Bonding and sealing for aluminum-alloy, glass, ceramics, plastic, stone, aluminum-steel composite panels. 2. Other building and industry purpose. Characteristics 1. One component, RTV-1, neutral, transparent and room temperature curing. 2. Fast cure, resistance to UV, ozone and water. 3. Excellent adhesion and bonding for construction material without primer. Limitation of Usage 1. Unsuitable for the long-term water immersion and underground joints. 2. Unsuitable for material containing grease, plasticizer, solvent and vulcanized rubber. 3. Unsuitable for the frosty or moist surface and the place of mechanical wear and tear. 4. Unsuitable for contact adhesive layer of insulating glass and surface of porous stone. Methods of Application 1. Clean the joint by using solvents such as toluene or acetone and keep the joint dry. 2. Stick an adhesive tape on the part where need protection, but the adhesive tape do not contact construction surface. 3. Trim the overflowed sealant before cured in order to keep a perfect appearance. Quality Guarantee 1.Please send materials to us,we supply free technical consultation and compatibility test before use the product. 2. We are responsible for the product within your correct storage and methods of use in shelf life. If the product doesn’t conform to quality requirement, we can change or refund. Except mentioned above, we do not have responsibility for change or refund, and any occasional and additional loss. Storage and Shelf Life 12 months shelf life if stored below 27°C in cool, dry places. Application Standard GB/T 14683-2003