换电力供应

Switching power supply(SMPS, SPS, Switch power supply)S-60 Series Switching power supply(SMPS, SPS, Switch power supply)1.Low price and high reliability 2.105 output capacitor 3.AC input power suitable for the world 4.High efficiency and low operation temperature 5.Soft-start current can reduce the AC input impact effectively 6.With short-circuit and overload protection 7.Compact size, light weight 8.100% full-load burning test 9.Installed with EMI filter, minimum waveModel Specification S-60-5 S-60-12 S-60-15 S-60-24 DC output voltage 5V 12V 15V 24V Output voltage error (Note2) ±2% ±1% ±1% ±1% Rated output current 10A 4.2A 3.4A 2.1A Output current rage 0-10A 0-4.2A 0-3.4A 0-2.1A Wave and noise(Note3) 75mVp-p 100mVp-p 100mVp-p 100mVp-p Inlet stability(Note4) ±0.5% ±0.5% ±0.5% ±0.5% Load stability(Note5) ±1% ±0.5% ±0.5% ±0.5% DC output power 50W 50.4W 50.4W 50.4W Efficiency 71% 78% 78% 82% Adjustable range for DC voltage ±10,-5% ±10% ±10% ±10% AC input voltage range 85132VAC/170264VACselected by switch Input current 2A/115V 1A/230V ACimpulse current Cold-start current 30A/115V 60A/230V Leakage current <1mA/240VAC Overload protection 105%150%TypeTOLDBACK Reset: auto recovery Over-voltage protection High-temperature protection Temperature coefficient ±0.03%(050) Setup rise hold up time 200ms,100ms,30ms Vibration 10500Hz,2G 10min./1cycle,Period for 60min,Each axes Withstand voltage Input and output interval1.5KVAC,Input and enclosure1.5KVAC,Output and enclosure0.5KVAC Isolation resistance Input and output interval,Input and enclosure,Output and enclosure0500VAC/100M Ohms Working temperature and humidity -10+60,20%90%RH Store temperature and humidity -20+85,10%95RH Overall dimension 0.56Kgs Safety standards UL1012 TUV EN60950IEC950,UL1950Approved EMC standards CLSPR22(EN55022),IEC801-234,IEC555-2 Verification Note:1.The testing condition for the parameter above is:230VAC input, rated load,25 70%Rh,Humidity 2.Error,include the setting error, line stability and load stability.(Note:5) 3.Wave test:adoptingA12double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting 4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage. 5.Load stability test: The load is from 0% to 100%,others 60%. 6.C2311must be knocked down.