出生地 |
Zhejiang China (Mainland) |
牌子的名字 |
OMCH |
模式的数量 |
S-100 |
S-100 series power supply,Switching Power Supply,adapter Model Specification S-100-3 S-100-5 S-100-7.5 S-100-12 S-100-15 S-100-24 S-100-27 S-100-48 DC output voltage 3V 5V 7.5V 12V 15V 24V 24V 48V Output voltage rang(Note:2) +/-2% +/-2% +/-1% +/-1% +/-1% +/-1% +/-1% +/-1% Rated output current 50A 40A 29A 25.8A 23.2A 14.6A 13A 7.3A Output current range 050A 040A 029A 025.8A 023.2A 014.6A 013A 07.3A Wave and noise(Note:3) 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 240mVp-p Inlet stability(Note:4) +/0.5% +/0.5% +/0.5% +/0.5% +/0.5% +/0.5% +/0.5% +/0.5% Load stability(Note:5) +/1% +/1% +/1% +/1% +/1% +/1% +/1% +/1% DC output power 250W 300W 348W 348.3W 348W 351W 351W 350.4W Efficiency 73% 76% 74% 79% 78% 82% 82% 83% Adjustable range for DC voltage 4.5-5.6V 6-9V 10-13.2V 12-15V 13.5-18V 20-26.4V 26-32V 41-56V AC input voltage range 85 132VAC/180 264VAC selectd by switch 47 63Hz; 255 370VDC Input current 2.4A/115V 1.2A/230V AC inrush current Cole-start current 15A/115V 36A/230V Leakage current <1mA/240VAC Overload proctection 105% 150% 150% 200% 105% 150% Type:pulsing hiccup shutdown Reset:auto recovery Over-voltage proctection 105% 150% 150% 200% 105% 150% Type:pulsing hiccup shutdown Reset:auto recovery High-temperature and protection 105% 150% 150% 200% 105% 150% Type:pulsing hiccup shutdown Reset:auto recovery Temperature coefficient +/-0.03%(0 50) Setup, rise,hold up time200ms,100ms,30ms Vibration 10-500Hz,,2G10min,/cycle, periodfor 60min,Each axes Withstand voltage Input and output interal:1.5KvAC,Input ad enclosure:1.5KvAC Output and enclosure:0.5KvAC Isolation resistance Input and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ Working temperature and humidity -10+60(Refer to output derating curve),20%90%RH Stoerall dimension -20+85.10% 95%RH Overall dimension 199*98*38mm Weight 0.65Kgs Safety standards Meet UL1012 requirement(Not apply for the mark) EMC standaras Meet FCC PART 15J Conduction class B Note:1The testing condition for the paramenter aboveis:230VAC input,rated load,2570%RH.Temperature.2Error.include the setting error,line stability and load stability.(Note;5).3Wavetest:adoptingA12 double wire for 20MHz,and0.1UF capacitor short-circuit fou interrupting4Inlet voltage stability test: when is over load,the lowest voltage of inlet is up to the highest voltage.5Load stability test:The load is from 0%to 100%