hot-plug signal surge protector

hot-plug signal surge protector This signal surge protector is designed according to the IEC lightning protection standard. It is for the lightning surge protection of analogue signal, switch signal, digital signal, communication signal and remote-control signal. It is widely applied in power supply system, chemical plant, cement plant, natural gas LNG gasification station, petroleum refinery, sewage treatment plants and civil aviation. Features 1. The module can be replaced at anytime without affecting the transmission of signal. 2. Overcurrent protection device, overvoltage protection device and circuit opening device realize efficiently discharging lightning current and resist lightning electromagnetic impulse (LEMP) 3.Multi-grade protection, low residual pressure, super transmission performance, fast response, large capacity, long life span 4. Convenient installation, simple maintenance Technical parameters Product Name DK-DCM 24 Hot-Plug Signal SPDRated current(A) 1Nominal discharge current (8/20μs)(kA) 10Maximum discharge current (8/20μs)(kA) 20Voltage protection level(L-N) (V) <36Voltage protection level(L-Pe,N-Pe) (V) <90Response time <1nsWorking temperature -40 degree centigrade +80 degree centigradeWorking humidity <95%Wire cross-section area (mm2) <2.5Installation support 35mm guide wayShell material UL94-V0 PlasticSize(mm) 106*65*14Weight(kg) 0.08 OEM, Privare label is welcomed. We have specilized in lightning protection for more than 20 years. We promise to supply you the highest quality lightning protection products and best price. You will also enjoy small MOQ and fast shipment with us.