High Frequency Inverting Switching Rectifier

1. Using non-contact automatic inverting function of IGBT high-frequency switch, the inverting time is very short (less than 20us), and it is a domestic initiative creation. More dense coating crystalline, smoothness, brightness, hardness canbe improved significantly, thereby effectively improve product coating quality.2. Current specifications: 500A, 1000A, 1500A, 2000A, 3000A, 4000A, 5000A, 6000A, and other arbitrary specifications.3. Voltage specifications: 0-12V, 0-15V, 0-18V, 0-24V, 0-36V and other arbitrary specifications. 4. Operational control functions of constant current and constant voltage. 5. Current and voltage stability accuracy is less than ±1%. 6. Low ripple coefficient of the current, current ripple coefficient in the entire scope is less than 1%, so this can be used extensively for low ripple electroplating process.7. With Manual and automatic changing forward and reverse working hours' functions, forward and reverse working hours can be arbitrary. The forward and reverse current and voltage can set arbitrarily.8. Over flow, over voltage, phase missing, over-temperature alarm and other electronic circuit's automatic protection function9. Ripple coefficient of power supply is less than 1%, so this can be used extensively for low ripple electroplating process.10. According to Users needs, it can configure RS-485, 232 and PRESS BUS computer communication interfaces to make computer group control functions, monitor andcontrol functions come true. Users may need to configure remote operational control box, operational control will be easy no matter how far distance. 11. 0-180s arbitrary setting soft start time control functions12. It may save 20%-40% energy than ordinary silicon-controlled rectifier does.