Heat pipe pressurized solar water heater

Pressurized solar water heater: Model No.: CH-56 Pressurized solar water heater Features of Pressurized solar water heater: 1.The solar water heater can install at any sunshine place, because the system is pressurized. Outlet water pressure is same as Inlet water pressure. The system’s working pressure is under 6bar. 2.All the vacuum tube are closed, inside of vacuum tube, there are copper heat pipe as heat transfer media, on top of vacuum tube, have a plug for closed the tube, no water into vacuum tube, so need not worry the tube will freeze in cold winter. 3.After heating water, if the pressure inside of tank is higher than limited pressure, T/P valve will start working, The T/P valve can relieve pressure. Material of Pressurized solar water heater: a)Internal tank: SUS304-2B 1.2mm b)Outer shell: White color armor plate c)Frame: Galvanized steel d)Insulation layer: polyurethane foam e)Vacuum tube: high borosilicate glass with Cu/SS/ALN coating+Copper heat pipe f) Specification of vacuum tube:φ58mm/1800mm g)Quantity of tubes: 12,15,18,20,24,30 h)Capacity: 100Liter to 250Liters Accessories: optional 1,Magnesium rod: Soften water, protection solar tank 2,Electric heater: assistant heating by electricity when the water could not satisfy your demand. 3,Check valve: prevent the water inside of tank back flow , generate negtive pressure will damage solar tank. 4,Controller: Sensor can test water temperature inside of solar tank Usefull life : 15years Reference data for CH-56 Pressurized solar water heater: Vacuum tube specificationQuantity of tubesTank's capacityDaylighting areaHow many peoplecan be usedLoading of 20GP/40GP/40HQ Container58mm/1800mm15tubes140L1.2m²2 3 Persons44/95/11018tubes168L1.44m²3 4 Persons38/81/9520tubes185L1.6m²3 5 Persons33/71/8224tubes218L1.92m²4 5 Persons30/65/7530tubes268L2.4m²5 6 Persons24/51/60