HDMI switcher HIFI

HDMIswitch 4*1 with HIFI The 4x1HIFI HDMI Switcher access to one HDMI sinks with stereo audio output, using four HDMI sources. The Switcher allows four HDMI devices to be switched or split easily to one HDMI compatible monitors or projectors. The HDMI output is with audio output by SPDIF or by 3.5mm Stereo Audio output.Our devices offers solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.FEATURES l Four HDMI 1.3 input signals switched to one single HDMI 1.3 sink devices l One HDMI output is with audio output by SPDIF and 3.5mm Stereo Audio Output l HDCP 1.2 protocol compliant l With HDMI-CEC function. l Support deep color 30bit, 36bit l Support Blue-Ray 24/50/60fs/HD-DVD/xvYCC l Digital audio format, as DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD l Support signal retiming l Support input up to 15metres AWG24 HDMI 1.3 standard cable length, output up to 25metres AWG24 cable length l Inputs can be switched with the IR remote control,also can be controlled by two buttons. l It can smartly jump over those input sources which are not connected. l it can come back to the default the input 1 status when restarted or reset. l No loss of quality l Installs in minutes l Need DC5V/2A power supply Operating and Connecting: Connect one cable from each HDMI source devices into HDMI Switcher inputs.Connect one cable from display (monitor or projector) into the HDMI Switcher outputs.3. Connect audio output SPDIF or COAX with stereo Equipment. 4. Use the RMT-IR remote control port to remotely switch or use button to switch between sources. 5 .Connect 5V power supply to the HDMI 4x1HIFI Switcher. SPECIFICATIONS: HDSW0401HIFI HDMI version…………………………………………………………………………… HDMI 1.3b HDCP version…………………………………………………………………………....HDCP1.2 HDMI resolution ………………………....24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i Support video color format …………………………..…………….24bit/deep color 30bit,36bit Support audio format……………….DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD Audio output…………………………………………………………………….SPDIF and COAX Max …….………………….…………………………………..225MHz Max baud rate…………………………………………………………………………….6.75Gbps Input/Output TMDS signal ………….…………………………..……………… 0.5 1.5Volts p-p Input/Output DDC signal ……………………………………………..………… 5Volts p-p (TTL) Input cable distance..…... ……………………….……≤15m AWG24 HDMI 1.3 standard cable Output cable distance…………………………….…...≤25m AWG24 HDMI 1.3 standard cable Max working current…………………………………………………………………………900mA Power adapter format………………..Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/2A Operating Temperature range……..…………….………………………………… (-15 to +55°C) Operating Humidity range………………………….….……….5 to 90%RH (No Condensation) Dimension (L x W x H) ……………………………….……………………..…134x89x22 (mm) Weight…..………………………………………………………..…….……..…………………325g IR Remote Operating Instruction1.Firstly take off the plastic film in the rear of the remote board.2.If you want to select any of the four signal sources to the output, press the 1,2,3, or 4 key .Like if you want to switch the 2 input signal to the output, press the 2 key directly.3.The up/down key in board is for switching the signal to the output circulatingly, and the remote will jump over the signal source input when it is no signal input.4.The plastic film is strongly advised to put it in the rear of the remote board when the remote is not used for long time.Notes: Pls use the machine as the instruction listed to keep the long use lifetime of the machine. 1.The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment. 2.All parts will be free from the strong shake, hit, fall. 3.Touching the power adaptor with the wet hands is prohibited. 4.Pls hold the power adaptor head and do not pull the power cord when cut off from the socket. 5.Pls turn the power off when the machines is not used for long time. 6.Pls do not open the cover and do not touch the inside parts. 7.Pls use the original factory power adptor.