HC-202 Low pressure PU foaming machine

HC-202 Low pressure PU foaming machine 1, Suitable material: Hard foam and semi-rigid Suitable temperature : 1825 Suitable viscosityISO600PAS,POLYLO3000PAS Mixing ratio (ISO: POLYLO): 1:1or 1:2 adjustable 2,Output capacity: 100g500g/sec Can adjust the output capacity according to the products requirement. Can change the speed of the pump via adjust the frequency of the converter; in that case, you can change the flow. Pouring time: 0.1-99.99/s (accuracy 0.01/s) 3,mixing head Belt type, mixed by stirring motor. The stirrer is made of high carbon steel. Wear resistant and high temperature resistant. The mixing head is equipped with self-clean system, which is controlled by electromagnetic valve, no leaking and corrosion resistance. LCD screen is place on the mixing head, which is connected with the PLC, easy to operate. 4,machines electronic control system Adopt PLC central control system. 5.7 inch touched LCD human-computer interface. Setting with manual and auto 2 kinds of operating mode, easy to operate. The controller has 50 working stations, which mean the machine can continuous to pouring 50 different moulds. PLC system can set and monitor the pressure, temperature, flow, clean and failures. 5,cooling system 2.5HP cooler, can cool and heat. When the temperature is lower than setting temperature, the cooler start to heat. To maintain the material tank keep constant temperature. When the temperature is higher than setting temperature, the cooler start to cool. To maintain the material tank keep constant temperature. Equipped with 2 PT100 heat detectors to monitor the ISO and POLY tanks temperature.