验证 |
CE |
能力 |
200 |
出生地 |
Zhejiang China (Mainland) |
牌子的名字 |
SUNSHINE/OEM |
模式的数量 |
GSIH-080 |
类型 |
疏散管 |
压力 |
压 |
供热系统 |
批/高科技中心(被动式) |
此类 |
直接插头 |
安装 |
独 |
Pressurized Solar Water HeaterStyle NO. GSIH-080 GUSHI Pressurized Solar Water Heater(CE CCC ISO9001)Advantages:1. Can he operated completely automatic if connect with intelligent controller. 2. Simple structure, easy plug-in installation, can be installed both on flat and inclined roof, and can be used with an auxiliary electric booster as to provide tot water without sunshine. 3. heat preservation ensured by one-off molding polyurethane foam with thickness 50 65mm. 4. Suitable for camping area, holiday residences. 5. stable and reliable performance, well wind resistance. 6. Meet the mankind healthy bath standard Vacuum TubesTank CapacityLoading QtyNo.DiameterLength20GP40GP15Ø47mm1500mm105591281812652112201404810324168418830210327136252276015Ø58mm1800mm1204393181443679201603473241923066302402350362881941Technical SpecificationOuter tankdiameter420mmmaterialStainless SteelInner tankdiameter360mmmaterialSUS304 2B food grade stainless steelFrameStainless SteelInsulation50mm polyurethane foamHail resistance25mmHeat preservation72hoursLong life15-20 yearsCertificationCE CCC ISO9001 Notice: 1.Installation must be completed in accordance with the relevant local standards and regulations. 2. Installation must be completed by qualified plumbing professionals. 3. Before installation, please check the collectors first. If the bottom of tube is silver, the tube is good. If a tube has a white or clear bottom, it is damaged and should be replaced. Please exchange them this way: Unfasten and remove the plasic cap on the bottom, then pull the broken tubes out along with the direction of the collector, then replace a good tube and install the cap. Please do not to damage the copper heat pipes inside the glass tubes. 4. Do not expose the tubes to sunlight, otherwise the inner tube and heat transfer fin will become very hot. The outer glass surface will not become hot. Avoid exposing the collector to sunlight until the liquids are inside the manifold. 5. If two or more collector units are used on the roof, please use connectors to connect the collectors, so that the connecting is durable and solid, without any leakage of water.