固定装载试验台转向架

. Main application and composing It is used for bogie static load test for locomotive, passenger train, CRH, urban railway train. And also can be used for bogie static pressure test for locomotive, passenger train, subway, urban railway train. It is non-standard test equipment which applies for assembly and inspects dimensions at the same time. It applies for electric-hydraulic servo loading; The loading strength can be set by manual in order to add load on bogie according to simulative train weight or technics request. When loading, can inspect wheel weight and four-angle height of bogie. Also can add wheel base measurement appliance according to customer's request. When make static pressure test, it can add weight system or not according to customer's request. This test stand is composed of gantry frame, track&bottom, centering device (longitude), weighing system, four angle measure system, measure control system. Wheelbase measure system is optional, can be added according to customer's request. Type JZSY-200JZSY-300JZSY-400JZSY-500JZSY-600Second series loading deviceLoad force200300400500600Load force tolerance grade0.5/1.00.5/1.00.5/1.00.5/1.00.5/1.0Cylinder stoke(mm)400400400400400Position tolerance grade0.5/1.00.5/1.00.5/1.00.5/1.00.5/1.0Load positionadjustableadjustableadjustableadjustableadjustableFour angle heightMeasure range800-1000800-1000800-1000800-1000800-1000Measure tolerance0.5/1.00.5/1.00.5/1.00.5/1.00.5/1.0Wheel weightMeasure range KN100100100/150150150Tolerance grade0.50.50.50.50.5EquipmentL × W ×H(m)6 ×4×3.56 ×4×3.56 ×4×3.58 ×4×3.58 ×4×3.58 ×4×3.5Application environmentInput voltage380V ± 10%Frequency50 ±1HZTemperature-20 to +45 degreeControl room temperature5 to 25 degree