Gr2 titanium bar/rod

Titanium bar/rod Dia:4 200mm L:15000mm max Gr Ti>99% ASTM B348,F67,F136 ISO 9001-2000,SGS test Delivery inadvance acceptable Other information about the titanium bar1. Grades: Gr1, Gr2, Gr3, Gr5, Gr7, Gr9, Gr11, Gr12, Gr232. Standard: ASTM B348, ASTM F136, ASTM F673. Specification: Pure Ti-bar Dia×Length 0.8-270×100-5000 (mm) Alloy Ti-bar Dia×Length 3.0-250×100-5000 (mm)4. The usage of various Titanium bars // detailed description: (1). Cp grade 1 can be used in the drawing parts for its good elongation and excellent corrosion-resistance. (2). Cp grade 2 is used most widely in the commercially pure titanium (3). Cp grade 3 is almost used in pressure,vessel. (4). Cp grade 4 can be used in some fittings parts and fastening pieces, but for complex shape need 300 degree celsius to form. (5). Alloy grade 5(Ti-6Al-4V) widely used in the titanium alloys because of its comprehensive mechanical and chemical properties. (6). Alloy grade 7 add little palladium in cp titanium and it has the most excellent corrosion-resistance,of course it costs higher. (7). Alloy grade 9(Ti-3Al-2.5V) is the most widely used in the golf clubs and bicycle girders. (8). Alloy grade 23, ELI(extra low interstitial),can be used in the medical appliance. 5. Related documents will be provided when delivery. 6. International Quality Management System ISO 9001:2000 7. The third party test is acceptable. 1. Allowable Deviation of Titanium bar(mm): Diameter or ThicknessAllowable DeviationHot forged barHot rolled barCold rolled bar >7 15±1.0+0.6, -0.5±0.3>15 25±1.2+0.7, -0.5±0.4>25 40±1.5+1.0, -0.5±0.5>40 60±2.0+1.2, -0.8±0.6>60 90±2.5+1.5, -1.0±0.8>90 120±3.0+2.0, -1.0±1.0>120 160±4.0——±1.5>160 200±5.0——±1.8>200 230±6.0——±2.0Deviation of length(mm): L<500, +5max; L>500, +10max 2.Degree of Curvature: Processing methodDiameter or Thickness (mm)Degree of Curvature(mm/m)Hot processing< 356Hot processing≥3510Hot processed, polished&cold processed round, square bar< 354≥355