工厂供应dreambox800hd

Dreambox 800hd Product description Bootloader 76,image Gemi 5.0 sim2.01 with the ALPS tuner L3 version - 300MHz MIPS Processor - Linux operating system -OLED-Display -MPEG-2/H.264 Hardware decoding - Tuner module,Plug&Play - 1 x Smartcard-Reader -V.24/RS232 Interface -10/100Mbit Ethernet Interface -1 x Scart(RGB,FBAS or S-Video) -DVI -2 x USB 2.0 -analog modem -S/PDIF Interface for digital bit stream out(AC-3) -64MByte Flash, 256MByte RAM -sata -fOR USE EITHER AS INTERNAL sata hdd 2, 5 -OR TO USE FOR EXTERN Esata -UNLIMITED CHANNEL LISTS FOR tv/rADIO -cHANNEL-change time no more than 1 second -Automatic service scan -directly bouquet-lists -EPG(electronic program guide) -multiple LNB-Switching controlsupports DiSEqC) -OSD in many languages and skin-support -Video text Decoder -extern 12V power supply Dreambox DM800 technical data DBS-Tuner mit DVB-S2: fREQUENCY rANGE 950...2150 mhZ dEMODULATION dvb-S2 98PSK,QPSK) Symbol rate DVB-S: 2....45 Mbaud/s,SCPC/MCPC DVB-S2: 10 31 Mbaud/s (8psk), 10 30 Mbaud/s(QPSK0 Video decoder: Video Compression MPEG-2 and MPEG-1 compatible, H.264 Video formats 4:3 TV-D device Audio decoder: Audio kompression MPEG-1 & MPEG-2 Layer l and ll, Mp3 Audio mode dual (main/sub),Stereo Frequency: 32 KHz, 44.1 KHz, 48KHz, 16KHz, 22.05 KHz, 24KHz. Output analog: Output level L/R 0, 5 Vss on 600 Ohm THD > 60dB(KHz) Crosstalk <-65 dB OPutput digital: Output Level 0, 5 Vss on 75 Ohm Sampled Data Filtering 32 KHz, 44.1 KHz, 48KHz. S/PDIF- Output optical, Toslink Ausgang Video: Ausgangspegel FBAS 1 Vss +/- 0.3dB an 75 Ohm Video parameter. Input Level FBAS 1 Vss +/- 0.3 dBon 75 Ohm Teletext filter in conformity with ETS 300 472 Standard TV-Scart: Output: FBAS, RGB,S-Video Serielle Interface RS 232: Typ RS 232 bidirectional Bitrate 115,2kBit/s max. Plug connector SUB-D-9 Function:Update of Firmware Ethernet: 10/100 MBit compatible interface Function: Update of Firmware Analoge modem: Analoge modem for internet connection SATA Interface: - for use either as internal HDD 2, 5or Esataor internal2, 5"HDD USB 2 x USB 2.0 Host LNB power and polarisation per tuner: LNB current 500mA mas; Short-circuit-protected LNB voltage vertical < 14V no load, > 11,5V at 400mA lnb vOLTAGE HORIZONTAL < 20V no load, >17, 3V at 400mA Power consumption: <15W at 12V External PSU Input:100-240v ac / 50-60hZ /0. 6a oUTPUT:12v =/ 3,0A Physical specification: Ambient Temperature +15C....+35C Humidity < 80% Pictures Dreambox 800 HD PVR Satellite Receiver Box Specifications:- 300 MHz MIPS Processor - Linux Operating System - OLED - Display - MPEG-2 / H.264 Hardware decoding - Tuner: DVB-S, optional: DVB-C, DVB-T - Tuner Module, Plug&Play - 1 x Smartcard-Reader - V.24/RS232 Interface - 10/100Mbit Ethernet Interface - 1 x Scart (RGB, FBAS or S-Video) - DVI - 2 x USB 2.0 - analog modem - S/PDIF Interface for digital bit stream out (AC-3) - 64 MByte Flash, 256 MByte RAM - SATA - for use either as internal SATA HDD 2,5“ - or to use for extern eSATA - unlimited channel lists for TV/Radio - channel-change time < 1 second - automatic service scan - directly bouquet-lists - EPG (electronic program guide) - multiple LNB-Switching control (supports DiSEqC) - OSD in many languages and skin-support - Videotext Decoder - extern 12V power supply DreamBox DM800 technical data DBS-Tuner mit DVB-S2:Frequency Range 950 .... 2150 MHz Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK) Symbol rate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPC DVB-S2: 10 – 31 Mbaud/s (8PSK) , 10 –30 Mbaud/s (QPSK) Video decoder:Video Compression MPEG-2 and MPEG-1 compatible, H.246 Video Formats 4:3 / 16:9 Letterbox for 4:3 TV-Device Output digital:Output Level 0,5 Vss on 75 Ohm Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz S/PDIF-Output optical, Toslink Ausgang Video:Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm Video parameter:Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm Teletext filter in conformity with ETS 300 472 Standard TV-Scart:Output: FBAS, RGB, S-Video Serielle Interface RS 232:Typ RS232 bidirectional Bitrate 115,2 kBit/s max. Plug Connector SUB-D-9 Function: Update of Firmware Ethernet:10/100 MBit compatible interface Function: Update of Firmware Analoge modem:analoge modem for Internet connection SATA Interface:- for use either as internal HDD 2,5“ or eSATAor internal 2,5" HDD USB2 x USB 2.0 Host LNB power and polarisation per tuner:LNB Current 500mA max.; short-circuit-protected LNB Voltage vertical < 14V no load, > 11,5V at 400mA LNB Voltage horizontal < 20V no load, > 17,3V at 400mA Count of active satellite position:DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION DiSEqC - Rotor Control Power consumption:< 15W at 12V External PSUInput: 110-240V AC / 50-60Hz / 0,6A Output: 12V = / 3,0A Physical specification:Ambient Temperature +15°C...+35°C Humidity < 80% Size (W x D x H): 195 mm x 140 mm x 40 mm Weight: 1,8 kg without HDD Note: Sat tuner is fixed. ( DVB-S TUNER )