Glazed tile 59402

glazed wall tile Size: 300x450mmItem no. : 59402Products Features:1. Good ceramic material fired under high temperature of 900C.2. Non-water proof3.galzed surfaceTechnical dataSequence Number Test Item Test method Provisions of standard Test Result Judgement 1Dimensions and surface quality Length and Width ISO10545-2The deviation,In percent,of the average thickness of each tile from the work size thickness :±0.6% -0.04% +0.11% pass thickness Average size ISO10545-2 ------- 8.6mm --------- DeviationThe deviation, in percent , of the average thickness of each tile from the work size thickness : ±5% -1.40% +2.33% Pass Straightness of sides ISO10545-2 The maximum deviation from straightness ,in percent, related to the corresponding work sizes: ±0.5% -0.10% +0.10% pass Rectangularity ISO10545-2 The maximum deviation from Rectangularity in percent, related to the corresponding work sizes: ±6% -0.27% +0.30% pass Surface flatness Centre curvature ISO10545-2 Centre curvature , related to diagonal calculated from the work size: ±0.5% +0.26% +0.31% pass Edge Curvature Edge curvature, related to the corresponding work sizes: ±0.5% -0.20% +0.17% pass warpage Warpage, related to diagonal calculated from the work size: ±0.5% -0.21% 0.09% pass Surface quality ISO10545-2 A minimum of 95% of the tiles shall be free from visible defects that would impair the appearance of a major area of tiles. pass pass 2Physical properties Water absorption ISO10545-3 Average : 6%<E≤10%, individual maximum 11% Average:7.8% Individual minimum:8.2% pass Breaking Strength ISO10545-4 Thickness≥7.5mm ,Not less than 800N 1040N pass Modulus of rupture ISO10545-4 Minimum 18MPa, Individual minimum 16MPa Average:32.8MPa Individual minimum:31.8MPa Pass Resistance to surface abrasion of glazed tiles ISO10545-7 Report abrasion class and cycles passed Class 2 failure visible at 600 revolutions --------------- Coefficient of linear thermal expansion from ambient temperature to 100°C ISO10545-8 Test method available ------------------ Thermal shock resistance ISO10545-9 Test method available Fully resistant pass Moisture expansion ISO10545-10 Test method available <0.01% --------------- Crazing resistance ISO10545-11 Required Fully resistance pass Frost resistance ISO10545-12 Required Fully frost resistance pass