Gelbo Flex Tester System (with Particle Counter)

Gelbo Flex Tester System (with Particle Counter)

肃州镇, 中国
肃州镇, 中国
公司
86-512-66877225
Charlie Zhang
联系人姓名

基本信息

出生地 Jiangsu China (Mainland)
牌子的名字 HRTECH
模式的数量 GLF-1
Honri Airclean Technology Co., Ltd has researched and developped the set of GLF-1 Gelbo Flex Tester System with the instruction of Jinan Quality Supervision and Inspection Center for Medical Devices. The particle counter for use with this GLF-1 Gelbo Flex Tester System is to ascertain the amount of loose fibres (lint) to shed from non-woven materials in a 30 seconds time period of flexing. With non-woven textile joining the traditional lines of products such as plastics, paper, textiles etc. for uses in healthcare and hygiene, cleaning, filtration, food packaging and more, cleanliness is an important consideration; therefore, such materials must have a low propensity to lint. Using IST160.1 and ISO9073-10:2003, Honri has designed the Gelbo Flex Tester System with particle counter (Honri brand) for measuring the linting of non-wovens in the dry state. This test can also be applied to other textile materials. Application Experiments of disposable or reuseable surgical bedsheet, surgical clothes and clean clothes for petients clinical staff and equipments. Principal While the sample is being subjected to repetitive twisting and compression cycles on the Gelbo Flex Tester, air is withdrawn from the testing chamber and the particles in the air stream are counted and classified on the particle counter. Environment of testing ISO 5 (class 100). Main parts Gelbo Flex Tester Flexing Chamber and Air Collector CLJ-BII(D)/CLJ-BM(D) Particle counter Laminar flow bench (optional, it is used to supply ISO 5 clean air) Standards IST160.1 ISO9073-10:2003 Introduction of main parts The Gelbo Flex Tester consists of two 82.8mm dismater mandrels, one fixed and the other attached to a moveable arm to perform the flexing action. The moveable mandrel twists and compresses the sample at 60 cycles per min of 180°rotation over 120mm of stroke toward and away from the fixed mandrel. The Flexing Chamber and Air Collector measuring 300*300*300mm is made from plexigalss and has removable panels for cleaning. Three panels have two suitable 10mm air vents. An isokinetic intake probe (air collector) is fixed to the centre of the flexing chamber. A purge filter is fitted to the instrument and is used to reduce the amount of airborne dust/lint within the flexing chamber throughout testing. The particle counter counts and sorts the particles in real time with relevance to sizing from 0.3 to 25.0μm. The counter has a flow rate of 1CFM (28.3LPM), and it can print reports on a built-in thermal printer. Iptional RS232 out put is available.

交货条款及包装

賣家沒有明確指定交貨條件。 有關更多信息,請聯繫賣家。
Фотографии

    密码恢复
    要恢复您的密码,请在下面您的电子邮件地址框与您已注册请输入:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    发生了错误。请检查您的电子邮件地址,然后再试一次。
    Ваш новый пароль:

    名称为空


    Выберите страну доставки

    您还没有写消息

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    已发送您的消息!

    親密

    1
    Рынок B2B
    取消
      查看更多
        地區搜索
        全球
        Категории
          产品名称