干冰机

Dry Ice MachinePatent Number: ZL 2007 2 0082727.4Use: Mainly for the production of high-density massive dry ice; It is very suitable for liquid CO2 companies who are going to produce and sell the massive dry ice. For food storage in airport, cooling and fresh transportation for sea food, or for decorationin catering industry. Features: 1.Vertical counter-type case, clear and beautiful in appearance; 2.Advanced CPU automatically controlled system, optimization of the hydraulic system, accurate andgraphical screen. 3.The adoption of the vertical fuel tank for the dry ice so that the phenomenon of eccentricwear is avoided, which greatly extends the useful life of the seal and the piston. 4.The installing location of the conveyor belt, making the ice mouth downward, can facilitate the side-by-side arrangement of multiple machines . 5.The device that can improve output percentage of the dry ice works well in reducing the raw material consumption. 6.Maintaining the oil temperature at 40°C which is the best for the hydraulic system can prolong the machine life 7.Noiseless, low powered, small in capacity (oil only needs 110 liter), all these features make the energy saving effect obviously.8.In the process of production, thickness of dry ice can be adjusted at any time by clicking the touch panel.(We can also design and manufacture the special size you need )Technical Parameters: 1.Material: Liquid CO2 (store in the cryogenic tank ,water content less than 60ppm) 2.Dry ice dimensions: length × width × thickness 125 × 105 × 20 50mm 3.Production: 100 Kg / h (when thickness 20 mm ), 130 kg / h (when thickness 50 mm) 4.Dry ice density: > 1.45g/m³ 5.Percentage of dry ice: ≥40% (The production of per 1000kg CO2 is no less than 400kg) 6.Electric Power: ≤ 5.5 kw 7.Run: Hydraulic 8.Capacity of hydraulic oil: 110 L 9.Size: 1400 × 750 × 1670 mm (length × width × height) 10.Total weight: 750 kg 11.The pressure of the LCO2 tank:2.2-2.3MPa(22-23kg/cm3) 12.Electrical power supply: 380 V 50 Hz three-phase power Tips: Please store it properly near the tank, away from wind and rain. Cryogenic CO2 should be unloaded on the roadside to facilitate delivery.