frp表

Skylite301 frp sheet Mechanics Features: High steel and high tenacity. Resin Ingredient: Advanced benzene-----new neopentyl glycol anti-ageing DTM-1 resin. Fiber Intensity: Non-alkali, non-twist, non-glue glass fiber. Surface Treatment: Surface applying Morplated anti-ageing glue (80 µm thickness or so) and pastes Melinex 301. Reinforced Bending Line: Tensile reinforced line with longitudinal uniform distribution (It depends on consumers to choose voluntarily whether adding) Glass Fiber: Adopting Taian high- quality glass fiber, the content no less than 30%. Unit Weight: 1800g/m² 2400g/m² 3050g/m² Nominal Thickness: 1.2mm 1.5mm 2.0mm Heat Resistance Limit: -60 to +130 Light Transmittance: 75%±2% ( light green) 53%±2% (cream white) Anti- ultraviolet Rate: 99.9% Tensile Strength: 100Mpa Flexural Strength: 180Mpa Cracking Elongation Rate: 1.9% Barcol Hardness: ≥50 Thermal Expansion Coefficient: 2.2×10¯5cm/cm/ Thermal Conductivity: 0.18w/m° k Warranty:15 years The Technical Parameters of FRP Sheet. Goodtenacity. No cracking phenomenon when driving nails in roof installation Having close combining with color steel plate. Cross- section thickness is uniform. The shape of FRP sheet is consistent with steel plate. Transmittance loss rate is low. No yellowing phenomenon after long term service. Thermal expansion coefficient is close to that of steel plate. No cracking and water leakage in nail driving place because of expand with heat and contract with cold. Light through FRP sheet assumes scattering shape and gentle. Bright and clean appearance, no distinct air bubble and cracking on FRP sheet. Anti- ultraviolet and anti- chemistry corrosion. Anti- ageing and anti- pulverization. Long service life.