Flexible TPU Road Divider

Flexible TPU Road Divider --Special road stud for central lines effectively dividing driving area. --Rebounding up to 100,000 times. --Compression resistance up to 30 tons for the base. 1. Body material: high flexible TPU. 2. Reflective sheeting: high intensity Reflexite reflector. 3. No fading in 5 years. 4. Replaceable flag & abrasion-resistant micro prismatic reflector. on the base. 5. Over 5 years life, 1 year warranty Special Road Stud to be used in central line effectively dividing driving area. Item No.: RSPD-1: one way RSPD-2: two way Body Materials: High flexible TPU Size: Upper Flag: 245(H)*115(W)*12mm Base: 250(H)*158(W)*25mm Reflective panels: (21± 0.5cm2 ) Acrylic micro-prismatic reflector Reflective sheeting: Reflexite high intensity Angle of Reflector: 30 degrees Flag colors: Yellow, red Weight: 1.4kgs Compression resistance: 30 tons for the base Life in use: 100 thousand times Type of bonding: Recommend by means of two-component adhesive Life: 5years Warrant: 1year Characteristics: 1. Bayer TPU material, spring back more than 100,000 times 2. Flag with reflective sheet work normally at night and in rainy, snowy & foggy weather. 3. No fades in five years. 5. Base is made of reinforced plastic with compression resistance over 30T. 7. Flag replaceable means longer life and less cost. 8. Glass-faced micro prismatic reflector on the base is abrasion-resistant, free of pollution and performing well on reflection Installation: 1. Identify the place for installation and clean up; 2. Clean bottom of the lane divider and glue it onto the installation place; 3. Clean the spillage and wait until 8 hours later before it works.