filling and sealing machine

filling and sealing machine Features: The mental hose tail sealer is mainly used in the materials’ package using the aluminum tubes as the packing container. The filling, tail-sealing and batch-number printing are finished atone time. This machine is used for the products’ packing in the fields of medicine, daily chemical products, food and fine chemical industry, for example, the filling and tail-sealing for the ointment, hair dyes, pigments, toothpastes, shoe polishes, and adhesives. Work process: Insert the mental hose in the socket on the indexing aluminum plate by hand and use the indexing mechanism for the transmission and location and photoelectric detection and the metering pump for quantitative filling. The tail sealing and printing are finished at one time and the finished products are automatically pushed out. Structural characteristics: This machine adopts piston mode to achieve precise filling and the measuring error is less than 1%. It has no liquid leak and its speed is adjustable. It also can be bidirectionally folded which is the most advanced horseshoe mechanism. It produces good sealed tails and its operation is simple. Its filling, sealing and printing are finished at one time. It thoroughly solves the problem of wiredrawing commonly existing in the producing process and the common fault of leaking at the tail after sealed. As for the special industry, it needs to be added with the gas protection device to prevent the solidification phenomenon occurring during transportation and storage process after the materials are sealed. Technical parameters: Mechanical Capacity: 10-35-production / min (adjustable) Industry-specific compressed air: pressure0.2-0.4Mpa Filling Quantity :5-55 ml of 30-150ml Power: 0.01 M3/min Tube Size: Dia. 10-35 mm Length: 50-180 mm Input supply voltage: 220 V 50Hz Dimensions: 1130mm * 750mm *1680mm Motor Power: 1.1 kw Weighs: 450 kg