Fiber Optic Fast Connector

ITEMTechnical ParametersApplicable for 3.1 x 2.0 mm Drop cableOptical fiber diameter 125μm ( 657A & 657B )Tight buffer diameter 250μmFiber mode Single modeOperation time About 100s(no fiber cut)Insert loss ≤ 0.3dB(1310nm & 1550nm)Return loss ≤ -40dBFastening strength of naked fiber>5 NFastening strength of naked fiber holder >10 NTensile strength>50 NUsing temperature -40 +75°COn-line tensile strength (20 N) IL ≤ 0.2dB RL ≤ 5dBMechanical durability (500 times) IL ≤ 0.2dB RL ≤ 5dBDrop-off test (drop-off height 4m, once per direction, totally 3 times) IL ≤ 0.2dB RL ≤ 5dB Application: 1. FTTx 2. Rebuilding the wiring in optical equipment roomFeature 1. Based on the pluggable non-preset tube technology 2. Precision ceramic components with co-axial self centering, excellent and durable optical property 3. Optical fiber fits axially in elastic way and avoids completely any false connect 4. Triple clamping through the naked fiber, tight buffer and cable, etc., can be used as patchcord 5. High on-line tensile strength of Optical Fast Connector after terminating, always keep connecting under the force from cabling and drawing. 6. Integrated protection of the casing to withstand harsh user environment. 7. Directly connectable with ONU without any optical socket, which reduces FTTH cost. 8. High success rate and easiness in installation with average splicing time 100 sec 9. Lower requirement for the habit working and work environment call for to the builder. 10. Visible Installation quality; independent from any far end light source and special device satisfying cabling construction in any sectioned way.