FD-BM1600-PVC PVC shrink film blowing machine(extruder, extrusion film, blow film) 1.Features: Special screw designed mix extruder,cycle water cool for screw,It is melt sufficiently for PVC material in lower temperature. Special die structure,it neither mandrill and distributary shuttle type.It more suitable PVC extrude,not dead angle,distribute uniformity. The die is heated and refrigerate by the cycle oil. Avoid the disadvantage of other heat type.It is easy to control the temperature. Remote infrared heater,control by PVM,the temperature uniformity. The second tow roller is silicon rubber,which can endure high temperatur. Rotate winder,the film roller can work for 30 days without tearing down the screw and die. 2.Technological parameter: Film width1200-1400 mmFilm thickness0.012-0.06 mmScrew diameter100mmL/D25:1Screw turn speed0 50rpmDriver power55kwCylinder heater32kwOutput kg/h90-120 kg/hDie diameterΦ200mmDie heater10 kwWidth of Haul-off rollers1200/1600mmHaul-off tow speed0 60m/minFilm transverse shrinkage≥45%Film vertical shrinkage≤5%Total power≤160kwOut size13500×5500×7200Weight18000kg