Fast Ethernet Fiber Media Converter

FastEthernet Fiber Media Converter Technical specifications 1) Operating standards: IEEE802.3u,IEEE802.3z/ab.10/100Base-TX,100Base-FX,1000Base-T/SX/LX 2) MAC addresses table : 1k 3) Data buffer: Built-in 128Kb RAM 4) UTP Connector: RJ-45,10/100/1000Mbps, Fiber connector: ST/SC/FC,1000Mbps 5) Cable: UTP: Cat.5 (the max distance up to 100m) Multimode Fiber: 50/125, 62.5/125um ( 2km or 5km) Singlemode Fiber: 8/125, 8.7/125, 9/125, 10/125um (20-120km) 6) Flow Control: Full duplex: Supporting standard IEEE802.3x Half Duplex: back pressure 7) LED: Power, FX SD, FX Link/Act, TX FDX, TX Link/Act 8) Power Requirement: AC 100 240V, 50-60Hz, DC 5V, 1A 9) Ambient temperature: 0 50°C; Storage temperature: -20°C 70°C 10) Relative humidity: 5 90% 11) dimensions: Internal power:30×110×40mm; External power: 26×70×95mm LED indicator lampStatusExplanationFX Link/ActOnConnection status display for fiber link."ON" indicates that Fiber link is in correct connectionBlinkActive status display of fiber link"Blink" indicates packet goes through Fx end.TX Link/ActOnConnection status display for electric link."ON" indicates that electric link is in correct connectionBlinkActive status display of fiber link"Blink" indicates packet goes through Tx end.FDXOnTransceiver works in the full duplex mode.OffTransceiver works in the half duplex mode.PWROnPower is on and normal.FXOnTransfer rate of optical interface is 100Mbps.TXOnTransfer rate of electric interface is 100Mbps.OffRate of electric interface is 10Mbps Relevant Products 10/100M Dual Core Fiber Media Converter Single core FX to7-TX PortFiber Media Converter Dual core FX to 4-TX PortFiber Media Converter 10/100M Dual Core ST Port Fiber Media Converter MultiMode to SingleMode Fiber Media Converter 10/100/1000M Dual Core SC Port Fiber Media Converter 10/100/1000M Dual Core Fiber Media Converter internal Power supply 10/100MSingle Core SC Port WDMFiber Media Converter For more products detal. Please send us inquiry.