防水材料

Waterproof Material SAM-930 self-adhesive polymer modified bituminous membrane with polyester reinforcement CE Certificated China well known trade mark "Yuhong" Brand It consists of high strength polyester as reinforcement and polymeric modified bitumen which is self-adhere at normal temperatures. Itabides by the industry standard JC 8982002 Self-adhesive polyester modified bituminous sheet material using polyester reinforcement for waterproofing. ·Specification (1) According to the physical properties, it can be classified into type I and type . (2)According to the upper surface material, it can be classified into polyethylene film(PE) type, fine sand type(S), and aluminum foil(AL) type. ·Dimension (1) Area:10m215m2 (2) width:1000mm (3) thickness: 2mm, 3mm ·Physical Properties(JC 8982002No. Type ι ∏ Width 1.5 2 3 2 3 1 Soluble substance contention,g/m2≥ 800 1300 2100 1200 2100 2 Water impermeability Pressure,MPa ≥ 0.2 0.3 Retention time,min≥ 30 3 Heat resistance, PES 70, no slippage, flowing, dropping.AL 80, no slippage, flowing, dropping.4 Tensile force,N50mm ≥ 2003504505 Elongation percentage at maximum tensile force,% ≥ 306 Softness at low temperature, -20-307 Shear performance,N/mm Between membrane ≥ 2.0 or fracture on the external agglutination section 4.0 or fracture on the external agglutination section Between membrane and aluminum plate ≥ 8 Peel strength,N/mm ≥ 1.5 or fracture on the external agglutination section 9 Puncture resistance Water impermeable 10 Tearing strength, N ≥ 125 200 250 11 Water vapor permeabilitya ,g/(m2.s.Pa) ≤ 5.7×10-9 12 Aging by artificial climate Appearance Tensile force retention percentage,% Class 1 No slippage, flowing, dropping. Softness at low temperature, 80 Appearance -10 -20 Note(1) The index of water vapor permeability is applied to the subterranean project. (2) For polyethylene membrane surface and fine sand membrane the index of aging by artificial climate is not applicable.