房间的楼的暖气温度调RTC80的。716

room floor heating thermostat Introduction The RTC80.XXX is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermostat The thermostat acquires the actual temperature with its built-in sensor or floor sensor, and the heating contact will close when the room temperature falls below the selected setpoint. Application For the control of warm-water (floor) heating systems and direct electric heating systems used in Commercial buildings, Residential buildings, Light industrial buildings... Features On/off control output for heating device Symbol indicator when heating is on Temperature limitation function for protecting the wooden floor Current room temperature displaying when the thermostat is switched-off “Key-lock” function for protecting the setted parameters (especially suitable for Public Places) Technical data Voltage: AC230V Power consumption: 3.5W Switching differential: ±0.5K Protective housing: IP20 Housing material: self-extinguishing PC Floor sensor: rubber-thermoplastic NTC sensor, cable length is 3m Selection table Model No.CurrentSensorTemperature limitation functionKey-lock function