Falt Cable For Elevator

Range of application: As control and signal cable for elevator as well as moving machine parts, its bending radius is smaller compared with round cables due to the closely packed shielded cores or bundles. It can be installed in dry and damp rooms. Properties: The outer sheath is extensively resistant to oil and cooling liquid. Standards:GB5023.6,IEC60227-6,EN 50214 Structure: Conductor: fine strands of bare copper wire, Acc.to VDE0295 CLASS5 Insulation:special PVC Colour:yellow,white,orangeg with black number with white digital coding Bearing:steel rope Outer sheath:flexible PVC,cold resistance ,flame resistance Colour:grey(RAL7001) Technical data: Rated voltage:300/500V Test voltage:2500V Minimum bending radius:0.3m<L<0.6M Burning vertically test:GB/T18380.1-2001 IEC60332-1.1 993 test passed Used under the nomal conditions.the temperature of conductor is lower than 70°C Temperature range:-15°C to +70°C TVVB (Parallel) free suspension length must not exceed 35 meters,and the lift speed 1.6m/s. TVVB(interwist) free suspension length must not exceed 80 meters, and the life speed must not exceed 4m/s.