epoxy self-leveling floor coatings

The product made of high-grade epoxy resin and excellent hardener, non-slip surface. Excellent resistance for acids, alkalis , salt ,certain organic solvents ,grease and have certain flexibility. Film forming is up to 300um operated once,Apply to schools,offices,houses,etc. This is a new generation of advanced floor coatings. *smooth and bright coating. * excellent Impact resistance,water resistance ,chemical resistance, oil resistance. *Tough abrasion, suitable for all indoor use. Technical itemsltem of floor paint Item CapabilitySurface and colour Smooth, various colors Viscosity(-4viscometer),S 60-120 Fineness (um) ≤60 Surface dry ≤8 Actual dry ≤24 Tenacity characterisitic(mm) 3 Impact resistance(cm) 50 Adhesivepower (level) 4 Oil resistance(23+/-2C Celsius)240h No change Water resisting property(23+/-2C Celsius)24h No change Damp and hot resistance 48h No change Salt fog resistance 48h No change Mycete resistance(level) 28h 1 Abrasion resistance kg/um(Falling Sand) 0,02 Execution method: base face demand: concrete should be lay up more than 28 days, base face was clean,dry and water content should below 6%.seal coat: brushing epoxy primer.approves blows the putty: usually after priming coat about 6 hours scraping the primer epoxy putty ,use the sander sanding and smoothing when actual dry, then scrape the second batch of putty and burnish it until the surface clean and smooth.surface:use the special appliance brush this product can make the grade level like the mirror surface.maintain: the openning time of the walk will be after 48hours and weight-goods will be after 72hours.the product is two-pack,Please use it after according to the regulation ratio and construction rapidly by not aging or minor aging.