Elevator rope with steel reinforced fibre core (Se

For many years our elevator ropeworks standard PAWO F3 has a proven history in many types of traction elevator applications.The outer strands are designed in Seale construction. The 9 thicker wires of the outer strand layer offer a higher wear resistance.The rope is primarily used where the service life is more defined by the attack of the drive sheave than by permanent bends. Thanks to the steel wire rope core a higher metallic cross section is achieved, in conjunction with excellent elongation properties. Deformations of the rope cross-section, e.g. in V-grooves are reduced to a large extent. The fiber content in the core of the steel wire rope works as a lubricant reservoir. Tensile Grade: 1570N/mm2, also available in other grades and standards, such as JIS, etc. Diameter: 6-20 mm Construction: 8*19 Seale with steel reinforced core, regular lay Nmber of load bearing wires: 152 low to mid rise medium number of bending cycles normal to high frequency wear-resistant low stretch extended service life