Electric Water Distiller

Electric Water Distiller Summary Itis widely used in laboratories for producing distilled water. The quality of distilled water is up to the standard of WFI in the Pharmacopoeia of the Peoples Republic of China (2005). Characteristics: It is made of high quality stainless steel, which is welded by argon arc welding. It is included three parts: evaporator, condenser and electric unit. The excess raw water will drain out automatically when is higher than the maximum level. A water proof cap is fixed in the copings center, which can avoid the drops splashing into the condenser to pollute distilled water. Top cover is convenient to open and clean. There is tap on the left side, which can drain the accumulated water at any time. With the knock-down style, condenser is easy to clean. The shell and condenser is made of high quality stainless steel. The distilled water is formed by cooling the steam in the condenser tube. Meanwhile, the raw water is preheated and flowed into the evaporator. It is not only made full use of heating, accelerated the evaporation, but removed the impurity. So it is improved the quality of distilled water. The heating part, which is fixed at the bottom of the evaporator, is composed with immersion heaters. Being fully contacted with the raw water, the heating parts are immersed into the water. At the time of running, the heat, which is produced by heater can be fully used. Main technical parameter: Model 5L/h 10L/h 20L/h Output (L/h) 5 10 20 Voltage (kw) 4.5 7.5 15 Power(v) 220 380 380