Electric steam boiler

Electric steam boiler: DataShell sideTube sideMediumSteamWaterPressure(Mpa)0.81.0Working Temp(°C)180150 Application:Steam espresso maker,steam iron,steam cleaner/dust collector/dust catcher,electric vacuum cleaner,most-heat sterilization,vapor/steam sterilization and other home appliance If customized: Tooling charge:refundable Free samples:5pcs 1.The main purpose The product is a shell-and-tube heat exchanger used for heating water with saturated steam. 2.Introduction of the structure The heater is a kind of used shell- and-tube heat exchanger which consists of head cover, Shell, nest of tubes and accessories. The head cover is a seal head with water inlet and outlet adapters attached. The shell is made of seamless steel pipe (also can be formed by steel plate roll welding), steam inlet adapter, condensing water outlet adapter, safety valve base, discharge and etc. are welded on the shell. The nest of tubes consists of tube sheet, baffle, U-heating tube and so on. The insulation materials are wrapped in appearance of the shell to reduce the heat loss. 3.Principle The water entering the heater from inlet of the head cover makes advance and return movement in U-tube to absorb latent heat of steam through tube wall, and then come out from the outlet of the head cover. Through adjust the steam flow capacity so as to reach design requirements of the outlet water temperature. The steam entering from the steam inlet of upper shell flows in the shell cavity through the baffle, again discharges from the condensing water outlet.