DVL-你说的是AJ啊AJ-17-1射频智能卡

DVL-AJ-17-1 rfid smart card Technical Parameter of DVL-AJ17-1 rfid smart card1. Receiving Frequency of rfid smart card: 38K2. Sending Frequency ofrfid smart card: 433M3. Working Voltage ofrfid smart card: 2.8V 4.5V direct current4. Working Temperature ofrfid smart card: -40°C 85°C5. Dimension of DVL-AJ16 rfid smart card: 90*45*6(mm)6. Standby Current of rfid smart card: less than 12 uA7. Sending Power of rfid smart card: less than 0.1mWPerformance Characteristics of DVL-AJ-17-1 rfid smart card1. Identification Distance of rfid smart card: More than 10 meters under the condition of penetrating thecars’ anti-explosion film;2.Battery Life ofRFIDsmart card : Lithium battery which can be recharged repeatedly and can be used for 5 years at least;3. Password Management: This RFIDactive tagcan be authorized and encrypted by the specific card issuer and cannot be blended after encryption;4. Identification Angle of rfid smart card: 60 degree sector zone;5. Working Mode of rfid smart card: Standby, small current6. High Anti-light: Import receiving head and modulation signal processing without interference from the sunlight.Operation Instruction of DVL-AJ-17-1 rfid smart cardBefore using DVL-AJ-17-1rfid smart card, please encrypt it by the RFID card issuer and authorize it by the software.1. This RFIDsmart carduses optical excitation power-saving working mode. Please put the RFID tag's activated window towards the RFIDreader when use it;2. ThisRFID smart card uses lithium battery which is rechargeable. If you find theRFID tagreading is insensitive or the reading distance becomes near, please connect it to PC to charge it for about 2 hours;3. This RFIDsmart cardis used with special holder. Please refer to the installation method to fix it. If you don’t use theRFIDsmart cardfor a long time, please remove it and putrfid smart cardin the shade.