多台离心泵

This series is a horizontal, single suction and multi-stage centrifugal pump, which adopts the hydraulic model of efficient and energy-saving products recommended by the sate, playing a leading technical role in the industry. It has such advantages as high efficiency, wide performance range, safe and stable operation, low noise, long life and easy installation and maintenance. 　　It can be used to transport clear water without solid particles (grinding materials) or suspended substances or other liquids with similar physical and chemical properties as clear water. It can also transport hot water, oil products, corrosive or abrasive media and so on by means of changing the pump’s material (or the material of the pump’s flow-through part) and sealing mode and adding a cooling system. 　　Our company has passed the certification of IS9001:2000 International Quality Management System. Our product design, production and service are provided with strict and standard control systems and our product quality is fully guaranteed. By its application scope, the horizontal multi-stage centrifugal pump includes the following types: 　　D pump can be used to transport clear water containing no solid particles with a temperature lower than 80°C or liquids with similar physical and chemical properties as clear water. It’s applicable for water supply and drainage works in mines, plants and cities. 　　DF pump can be used to transport corrosive liquids containing no solid particles with a temperature range of -20°C～105°C. The pump’s allowable inlet pressure shall be less than 0.6MPa. 　　DY pump can be used to transport oil and petroleum products containing no solid particles with a temperature range of -20°C～105°C and a viscosity less than 120cP. 　　DG horizontal single-suction multi-stage centrifugal pump can be used to transport the clear water or other liquids with similar physical and chemical properties as clear water. It’s applicable for the water supply in low/middle/sub-high pressure boilers as well as for the high-pressure water supply and drainage in plants or cities. The temperature range of transported medium is -20°C～105°C; And the allowable inlet pressure shall be less than 0.6MPa. 　　In addition, our company can provide this pump series’ multi-outlet structure and function as required by customers. The user can select the pump’s material, sealing mode, structure, motor capacity and so on in a reasonable way in concentration, specific gravity and working temperature, the pump’s inlet pressure and so forth. D (DF, DY) and DG are horizontal, single-suction and multistage centrifugal pumps. Their suction inlets are in a horizontal direction while their discharge outlets are upward and vertical to the horizontal line. Their case part, including water inlet section, middle section, water discharge section and bearing body, are integrated through the tension bolts, The pump stage number can be selected in accordance with its lift head. (The water pump’s inlet and outlet directions can be customized). 　　The rotor part of this series is mainly made up of the shaft and such parts mounted on the shaft as impeller, bushing and balance disc. Of them, the impeller quantity is subject to the pump stage umber. The parts mounted on the shaft are fastened with flat keys and spindle nuts to make them integrated with the shaft. The whole rotor is supported by rolling or sliding bearings on both ends. The bearings, subject to different types, all bear no axial force; instead, the axial force is balanced by the balance disc. When the pump is running, the rotor is allowed to move an axial movement in the pump case. The annular ball bearing is not allowed to be used. The rolling bearing shall be lubricated by grease while the sliding bearing by thin oil with the oil ring for self-lubrication and the circulating water for cooling. 　　The sealing surfaces between the pump’s water inlet section, middle section and water outlet section all adopt the molybdenum disulphide grease for sealing. There’s a sealing ring, a guide vane bushing and so on mounted between the rotor and fixed parts for sealing. When the sealing ring and the guide vane busing are so worn to have an impact on the pump’s working performance, they shall be replaced. 　　The shaft seal has two modes: mechanical and packing. D pump adopt the packing seal mostly while DF and DY pumps adopt mechanical seal generally. In case of packing seal, the packing ring shall be positioned accurately with a proper tightness of packing, subject to such a standard that the liquid can seep drop by drop. All sealing elements of the pump are mounted in the sealing chamber with a certain pressure of water inside the chamber for the purpose of water seal, cooling or lubrication. There is a removable bushing mounted on the shaft seal to protect the pump shaft. 　　DG pump sub-high pressure pump adopt the structure of sliding bearing with thin oil lubrication generally. DG85-67 and DG155-67 pumps adopt the structure of either sliding bearing with thin oil lubrication or rolling bearing with grease lubrication. The rest types all adopts the structure of rolling bearing with grease lubrication. Generally the major parts of low/middle pressure pumps adopt high-quality cast iron while those of sub-high pressure pumps adopt cast or stainless steel. 　　This series is directly driven by the prime motor through the elastic coupling. When viewed from the prime motor direction, the pump rotates clockwise.