Diatomite Adsorbent

Diatomite adsorbent 030 series is widely used in industries such as aluminum foil, copper foil, and slab band etc. At present,“high flow” and “standard flow” diatomite filter-aids in domestic and international traditional usage are mechanical interception type, which have different propertied compared with 030 series adsorbent: 1 the inner hole surface of 030 series adsoption agent particle has been activated, which has the features of 0.1-1μm particles in selective absorption filtrate, has mechanical interception accumulation and bridging effect and can capture 0.1-1μm fine particles and rubber compounds, so while particular absorption accuracy is reached, the adsorbent consumption is smaller and the time-consuming is shorter. 2030 series of adsorbent particle size is in normal distribution, which can achieve the above results with one adsorbent and is better than the adsorption effect of combining several mechanical inter caption types. 030 series of absorbent produced by our company is the only product fully meeting the requirements. This product has the features of small dosage, long service cycle, high precision and good effect, which can increase oil life by 30% after using and reduce activated clay addition by 20%. This product has stable production, stable quality and reliable performance. Product Technical Index Appearance: light yellow powder; micro: porous structure under microscope TypePermeability(Darcy)Wet Density(g/cm3)Average Particle Diameter(μm)PHMoisture( % )0301.6—2.0≤0.37Actual Measurement8--10≤1.0030G2.1—2.5≤0.37Actual Measurement8--10≤1.0