单一的微压力开关

Single micro pressure switches Introduction MP45-Series Micro pressure control is an electrical switch controlled by pressure signal. It's affected by the discharge pressure of the compressor. When the discharge pressure of the compressor exceeds the setting pressure of the control, it will cut out the power supply and protect the system from undue pressure. Example: MP45F01B11D3T2.6 Instruction:Type MP45,Female flare,7/16"-20UNF,Lead wire N.C.,Lead wire length 610mm,Off pressure 3MPa,On pressure 2.5MPa. Type explanation ModelMP45F01B11D3T2.6ExplanationType code MP45M means manual reset type Connect code W Connect size code X Switch action code Y Lead code Z Off code D Off pressure On code T On pressure Note: Refer to the table of code instructions for the details of codes in the table. Code instruction CodeInstructionWConnection way: Female flare “F”,Male flare “M”,Solder “W” XFlare size code: 01 (7/16" - 20UNF),02 (1/8" - 27UNF),03 (1/4" - 18UNF),04 (3/8" - 24UNF) Solder size code: 05 (Φ6×86),06(Φ6×94),07 (Φ6×100),08 (Φ6×78×60 right angled),09 (Φ2.5×915 capillary tube) YCode: A - Lead wire N.O., B - Lead wire N.C., C - Quick connect terminal N.O., D - Quick connect terminal N.C., E - Lead wire SPDT, F - Quick connect terminal SPDT ZCode: 10-Lead wire length 305mm,11-Lead wire length 610mm,12-Lead wire length915mm, 13-Lead wire length1220m DOff code Off pressureOff pressure range: 0.02 4.5MPa(3 650 psig) TOn code On pressureOn pressure range: 0.02 4.5MPa(3 650 psig)