CTH series power adjusting machine

Brief Introduction of Products: The panel has several LED indicator lights, showing the operative mode and malfunction cause of SCR power regulator for maintaning in time if possible.The PC panel adopts SMD piece component, function with good anti-interference, low faults, and less interference.With soft startup, performance can be more stable in sharply change and more durable.Linear proportional output can preciously temperature control. The 0.3% precision can meet any loading quests.Made in aluminum alloy, the machine is small and well heat radiate, can make fan fully radiate air.Input modes: 4-20mA DC1-5V DC2-10V. P1 JUMP can regulate these modes in stand of changing the mainframe.The whole scrics of machine extra install high speed fuse and switch for overheat protection, protecting power regulators.Serving temperature is -10°C 45°C; It will not dew when the humi dity reaches 90%.The terminator Acland AC2 of PC panel can input the voltage between AC200-240V.If it is installed in closed control box, the box should has hole and fan for airiness.If the heat radiation is not well, please change the power under 70%, otherwise, the power controller will state the overheat protecetion, and stop output..Please regularly check the working state. If it doesn’t work well; please fix the fan before regular service.