CNC ROUTER

1.Advanced DSP digit-control system, handle operation and large liquid crystal display brings out more convenient operation, simpler maintenance and much more human nature on the design of themacbine. 2.Unique intelligent calculation fully develops the potential of the engine and leads to high speed processing, the synchronization of curves and straigfit lines, smoother curves and race speed at 12m/min. 3.Unique and dynamic renewal ability of the system enables the customer, according to different processing requirements, to change the controllirig of the system and therefore, effectively improves the processing efficiency( Please start the operation with the instructions of the technical skaff from the factory or agent). 4.Large interrial memory capacity of 32M is able to store mote than thirty processing files simultaneously and open and process any of them. 5.Connection with the computer via USB interface enables data tp be transmitted in a second , supports hot plug and play,in the syste(Window98/NTIW00/XP). 6.More compatible:It is compatible with such CAD/CAM software like Type3/Artcamlcastmate/Proe/UG/Artcut etc. 7.It is able to go on engraving when the electricity is cut or the tool is broken. Excellent two-bolt pole made in Germany and slidevvays imported from Japan or Korea. The spindle with high power and-frequency conversion enables the machine to cut plexiglass of 20-30mm thick in one cut and opplys toprocess advertising, mowld plates, presents and architectural wood models. NumberFunctional indexStandard Value1Working Area1094×800mm 2Travel of Engraving900×650×70mm 3Maximum Speed6000mm/min4Engraving SpingleInverter 800W5Rotational Speed of Spindle6000-24000rpm6Manner of Receiving DataUSB interface7Capacity of Memory32M8Format of InstructionsGcode,HPGL9CutterΦ3.175orΦ6.0010Power SupplyAC220/50HZ11Electric Power 400W12Driving SystemStepper13Weight260Kg