传送带

conveyor belt Feature: the carcass is EP fabric(warp is PET, weft is NN66). With the benefit that light in weight, high modulus, impact resistant, Low loading extension rate, Easy to trough and track, good flexibility , Anti- heat and humidity and also avoid insect destroy. conveyor belt Market: Aggregate, Baggage Handling, Bulk Handing, Cement, Coal, Foundry, Grain, Hard Rock, Package Handling, Wood Products, Sand and Gravel, Steel Products. conveyor belt Benefits: 1,Reduced strength The combination of fabric design and dip process provide less elastic and permanent elongation on all specifications this minimizes take-up concerns and reduce the number of splice at break-in. contact Shandong aneng to calculate permanent and elastic elongation requirements for your special systems. 2,High-modules, superior troughing characteristics With the high-tension PET warp and NN66 fiber could provide the belt high-modules and superior troughing characteristics. 3,Variety of cover compounds and cover gauges Protect your product with the proper compound and cover gauge for the application. Specification and technical data of conveyor beltFabric typeFabric structurePly thickness (mm/p) Ply Thickness (mm/p)(N/mm) Strength series(mm) Cover thicknessWidth mmLength mmWarpWeft2ply3ply4ply5ply6plyUpperUpperPolyester (EP)Polyester (EP)Polyamine (P)EP-800.61602403204004801.5 120 4.5400 2500≤300EP-1000.75200300400500600EP-1501300450600750900400 2500EP-2001.140060080010001200EP-2501.25500750100012501500EP-3001.35600900120015001800800 2500EP-3501.4510501400175021001000 2500EP-4001.55160020002400EP-5001.7200025003000Conver properties ofconveyor beltsTypeMpa ≥Mpa ≥mm2 ≤Change Rate of tensile strengh and elong after aging%H24450120-25 +25D18400100-25 +25L15350200-25 +25Adhesion and elongation ofconveyor beltItem Between Plies N/mmN/mm Between rubber and carcassElongationCovering thickness 0.8-1.5mmCovering thickness >1.5mm Longitudinal elongation at break % ≥Longitudinal elongation at reference load % ≤All the sample average ,N/mm,≥4.53.23.5All samples minimum peak ,N/mm,≥3.92.42.9104Note: All samples shall not exceed the peak values