车画面：1k号金属色的颜料(Basecoat金属)

Mix Ratio (by volume)M Series metallic paint: 1 partThinner SCC-601 or SCC-602 or SCC-603: 1 1.2 partMake a proper thinner proportion according to different temperaturesPot life24hours@20degrees centigradeSpray gun & air pressuregravity type 1.21.5 mm,suction type 1.41. 6 mm, 45PaSpray methodSpray 2 3 coatings, spray thickness: 15 25μm, Waiting Interval: 5∼10 minutes; After the final spray, wait 15-20 minutes before spraying a finish varnish.Drying TimeAfter 15 minutes at 20degrees centigrade, spray the varnish within one hourSubstrate treatmentWet-sand the middle-coating paint with 800-grit sand paper. When the paint is dry, spray metal colour primer.If the theres old paint film unsuitable for the substrate, it is suggested to use two-component middle-coating blocking primer, otherwise such phenomena as peeling off, bubling and floating would appear.As the metallic paint has a high transparency, usually operators should ensure that the paint film of the middle-coating baking paint is unified in colour and has no sanding mark and grain on it, or the marks and grains would emerge through the metallic paint.Shelf lifetwo years if sealed and kept in a cool and dry place.Packaging1L x 6 tins/ctn