capacity tank

The plant of oilfield equipment OOO "ZNPO UNIKOM" produces capacitive equipment of various modifications, purpose and amounts (from 1 to 200 m3). Capacity: horizontal, vertical, underground, land (including on the chassis of the tractor/trailers, frame-sleigh or lodgements). Design features of the tanks of the Plant "ZNPO UNIKOM" provide them with a perfect geometry and excellent performance. Depending on the purpose of the vessels can be used for cooking or storage of acids, salt solutions, process liquids, water-based (natural muds, clay, neginoth and inverse emulsion solutions), combustive-lubricating materials, oil-containing emulsions and solutions, as well as storage tanks for drinking water. Structurally, the Capacity of the plant "ZNPO Unicom" can be of various designs: single, combined, mounted on two-axle chassis of the tractor /car trailer, on the frame-sledge, tool trays, supports, etc. is Possible to install Capacity on a shared basis as part of the complex equipment, such as: technological Capacity combined with a drilling capacity of the tool with the workshop with the pump unit on chassis 3-axle tractor trailer. An exclusive feature of the Plant "ZNPO UNIKOM" is that we offer our Customers the production of Containers both in standard technologies from high-tech steels, and UNIQUE insulated, laminated, spiralvoice capacity made of polyethylene PE100 with interlaminar reinforcement corrugated polypropylene pipe. Advantages of polyethylene tanks: Used for the manufacture of containers polyethylene PE100 used inert to all corrosive environments (i.e. acids, heavy salt solutions, etc.), and also has a low coefficient of thermal conductivity (in 198 times lower than steel). Capacity for external use do not require additional thermal insulation (i.e. it's containers-thermoses). high rigidity and low weight, (Spiralvoice the multilayered structure of the walls of the vessel gives high ring stiffness (up to SN=12кН/m2), and weight is 5-7 times less compared to similar products made from steel) the lack of galvanic corrosion from polyethylene products. In the process of operation does not require repair and restoration works of the inner and outer surfaces, as in the case of use of metal containers, which significantly reduces operating costs and increases equipment reliability. Due to the low adhesion of polyethylene there is no formation of salt deposits on the inner walls of containers, which greatly facilitates their use (no need to peel). the life of containers made of polyethylene not less than 50 years.