Cable free socket

Cable free socket: 1. With its front facing you, hold it a direction that makes it look like an upside down T. on its back, the single pin should be adbove the horizontal pair pins 3. Examine the wall socket A: If the wall socket is a flush one, just plug the product on to the wall socket B: If the wall socket is a raised one, insert the two back supports into the holes in the back of the plug.adjust the length (40to 45mm) of the supports till the length is equal to the distance prom the back of the plug to the wall.then lug it on the wall socket. 4. To use this adaptor simply plug in a device into one of the4 sockets and switch on the corresponding switch(for that socket) for the non switched socket just connected the plug to that socket and power will automatically flow to the connected device. 5. If you buy the product with surge protector, the green surge protection light will light , it means all the sockets on it are surge protected. When the green light is off, it means the surge protection is not working. This means that any devices plugged into the T-socket adaptor will not be protected from surges or spikes in the supply 6. Maxiumn Load is 3000W, Maxinium Voltage is 13A 240V AC 50Hz 5V 1000mA USB Charger , suitable for Iphone, mp3,mp4 etc CE/EMC/LVD/RoHS approval