Brass Plates

Brass Sheet&PlateVarietyTemperSpecification(mm)ReferenceThicknessWidthLengthCommon Brass PlateR4 8600 2000≤4000GB/T2040—2002>8 60600 3000≤6000>60 120600 2000≤4000Company Internal StandardY Y2 M T0.2 0.496001000 2000GB/T2040—20020.5 2.5600 10001000 30003.0 4.0600 2000≤4000>4.0 10600 3000≤6000Brass plate for the application of RadiatorM TM0.7 1.2600 6501000 1500GB/T2532—1997Brass Plate for Watch&ClockM Y2 Y T0.30 1.506001200 2000Company Internal StandardBrass Plate for Special PurposeM2.0 3.06001000 2000Complex Brass PlateR4.0 8≤550≤3000GB/T2040—2002>8 60≤600≤4000>60 80≤630≤4000Company Internal StandardY Y2 M0.5 2.5300 5001000 2000GB/T2040—20023.0 4.0≤550≤4000>4.0 10≤550≤4000Tin brass plateR4.0 8600 2000≤4000>8 60600 3000≤6000>60 150600 2500≤4000Company Internal StandardY Y2 M0.5 2.5300 500100-0 2000GB/T2040—20023.0 4.0≤550≤4000>4.0 10≤550≤4000Lead Brass Plate for Watch&ClockY Y2 T0.2—0.95200 5201200 2000Company Internal Standard>0.95 6.0200 550900 2000Brass Plate for Heat ExchangerR≥9 60Note R-Extrusion Y-Hard Y2-1/2 hard M-Soft Mechanical Properties TemperTemper Tensile Rm MPa Elongation A11.3(%)≥ Hardness HV SoftM≥290≥40≤901/4 hardY4325-410≥3585-1151/2 hardY2355-460≥25100-130HardY410-540≥13120-160Extra hardT520-620≥4150-190SuperhardTY≥570≥180 Note We can provide productswith other properties according to customers` requirements. Shanghai Xin Ye Metal Products Co., LTD. There are two hot-rolling mills for sheet and strip with flatness accuracy less than 100I unit andthickness tolerance less than±0.10mm,and two double surface milling machines (Japan and UK) with longitudinal thickness tolerance of ±0.05mm max and surface roughness Ra≤3.2µm. There are 4 rolling mills from MINO,Italy and from FROHLING,Germany,all with flatness tolerance of max 30I unit,and thickness tolerance at steady state ±4.0µm.There are 3 cleaning lines from Junker, Germany and 17 bell-type annealing furnaces.The mother coils from these production lines are of good flatness and bright surface.