Black Silicon Carbide for Sandblasting and Abrasiv

1. Description:Black silicon carbide is produced at high temperature in an electric resistance type furnace with quarts sand and petroleum coke as its main raw materials. Its hardness is between fused alumina and synthetic diamond. Mechanical intensity of it is higher than fused alumina. It is brittle and sharp and has electrical and heat conductivity in some degree. The abrasives made of it are suitable for working on cast iron, non-ferrous metal, rock, leather, rubber, etc. It is also broadly used as refractory material and metallurgical additive. 2. Chemical and Physical Composition Name Size Chemical Composition(%) SIC F.C Fe2O3 C/Black Silicon Catbide F F4-F90 98.6min 0.20max 0.40max F100-F150 98.15min 0.25max 0.50max F180-F220 97.30min 0.30max 0.55max F230-F280 97.30min 0.30max 0.55max F320-F500 97.00min 0.35max 0.60max F600-F800 96.50min 0.40max 0.60max F1000-F1200 95.50min 0.50max 0.70max P P12-P100 98.6min 0.20max 0.40max P120-P150 98.15min 0.25max 0.50max P180-P220 97.30min 0.30max 0.55max P230-P360 97.30min 0.30max 0.55max P400-P1000 97.00min 0.35max 0.60max P1200-P1500 96.50min 0.40max 0.60max P2000-P2500 95.50min 0.50max 0.70max 3.Advantages:1. Large melting furnace, longer melting time, lead to more crystallization, bigger crystals, higher purity and less impurities.2. Good hardness, longer life.3. Chemical washed and water washed, good cleanness.4. Special treated products get higher purity, better toughness, and better grinding effect.