biomass stove for pellet&coal

Main Features and its Performance: The machine uses biomass as fuel and is free of smoke and tar, while burning effectively. It is characterized by its strong and adjustable flame, low emission, and high thermal effectiveness and can be lighted directly and fast without using electricity. It is of thermal insulation, which improves its combustion performance to make the most of the heat. It is pollution-free, so using it helps to improve the ecologic environment, and indoor air quality,which does good to people’s health. It is designed to have an elegant appearance and is of fire-resistance, of oxidation resistance and firm, so it can be used for a very long time. Besides, it is so small and light that it can be moved easily. Because of those features, it is really user-friendly and easy to be maintained. Design 1. Our stoves are elaborately designed and of elegant appearance. They quite fit for rural use for a large furnace plate that can be used as table.2. The secondary air inlet is designed in proportion with the size of the hearth by aero hydromechanics theory to control the intake of air. The flame swirls towards the center of the furnace under the influence of aero hydromechanics, thus it becomes strong and the mixing air can be burned sufficiently so as to meet smoke dust emissions standards.3. The design of secondary air inlet increases the thermal efficiency by more than 10%. 4. Easy-open feeder decreases the work strength. If you want to do more cooking, you can open the cover easily and add burning material,which avoids smoke pollution compared with traditional ways of burning. 5. Our stoves are of proper structure, of excellent air tightness, free of smoke, environmentally friendly and healthful, thus they can decrease disease rate.6. Users can see the burning through the peer hole. 7. The furnace core is made of fire-proof material to prolong its use life. 8. There is a handle on the stove. Ashes can be got out easily by pushing and pulling the handle only. 9. There is a chock. Flame force can be adjusted by it accordingly. 10. The ash holder is big, avoiding frequent cleanup of ash. Manufacturing Our stoves are made of brand-new steel of excellent quality, and the jerry-buildings are strictly forbidden. 2.All spare parts are made by ourselves, which gives a strong assurance to the quality. 3.We use the gas shielded welding which can make sure the joints are smooth and firm. 4. The car spray of craft of the lacquer that bake reaches on the face plate of furnace, bring brand-new visual sense to enjoy for kitchen life undoubtedly.