Bicycle Chain Tool

Chain Tool For repair or replacement of bicycle chains Use for 1/2" x 1/8" single speed 1/2" x 3/32" 5-7 speed chains Installation: REMOVE CHAIN 1. Insert chain in tool 2. Tighten or loose black knurled knob until width adjuster is tight against the side of chain 3. Center the black tool pin on chain link pin- turn remover clockwise pushing chain pinalmost out of side plate 4. Remove chain from tool, bend slightly to separate links INSTALL CHAIN OR LINKS 1. Place chain in tool so chain link pin is facing towards tool pin 2. Turn handle clockwise pushing link pin in until link pin is flush with both side plates 3. Make sure link pins are installed in side plates completely