Autoclave Aerated Concrete (AAC) Production Line

Autoclave Aerated Concrete (AAC) Production Line

Changzhou Qu, 中国
Changzhou Qu, 中国
公司
86-519-89883750
Michelle Gu
联系人姓名

基本信息

We are a professional company covering the comprehensive and systematic business scope including technological design, fabrication, field erection and commissioning, personnel training and technical service in the field of AAC block production line. We have already set up a lot of AAC plants in China market. Currently, we are expanding oversea market actively. We produce 4.2m, 4.8m, and 6m series AAC production line for Middle East, Africa and South-east of Asia, etc. The Whole set of Aerated-Concrete equipment we produced have become universal products for domestic new or existing aerated factories. AAC blocks will become dominate wall materials in future. Application Scope: AAC block producing Feature The operation of our plant is simple and pratical. Waste materials and water can be recycled during operation process, it is environment-friendly. The whole equipment has higher degree of automation. The final products are high in precision, qualified product rate ≥ 98%. Our AAC plant has good cost performance. Production Process: 1.Stocking and supplying raw materials 2.Processing raw materials 3.Batching and pouring 4.Cutting 5.Grouping and maintaining process 6.Steaming in autoclaves 7.Final products packaging Product Principle 1) Technology Orientation Production and application of aerated concrete has a history more than 40 years in China. Viewing from technology point, high quality products can use 3mm special sand slurry technology to meet the construction requests and 50% energy saving goals. (When mortar joint is less than 3mm, take thermal conductivity coefficient of wall as 1; when mortar joint is more than 3mm, take thermal conductivity coefficient of wall as 1.5). Based on the history of the aerated concrete development, only high quality products can bring a prosperous market. Thus, the technology orientation of this scheme is high-class products according to China Standard GB11968-2006. 2) Production Capacity In our factory, the main production capacity is annually 50,000m3, 100,000m3, 150,000m3, 200,000m3, etc. The product is aerated concrete block which is light in weight.Also, there is a reservation of plate in consideration of users' need. 3) Product Specification Products conform to requirement of 04 07 grade blocks stated in GB11968-2006. General Specifications of Aerated Concrete Blocks Service 1.Production Line Design. Including: drawing of plant working process , drawings of land construction, drawings of power working, drawings of driving force for working, drawings of anti-dust, drawings of water supply and drainage, and drawing of air pipeline construction. 2.Technical Guidance of Building Factory Including: consultation of facility, Equipment installation guide, constitution the production preparation, etc. 3.Providing the technical information of setting up factory Including: part of the factory management system, all posts accountability of production line, process rules, safety rules, setting a quota of staff and posts, pre-production tools directory, laboratory instruments, product catalogs, and test methods. Contract Information: Tel: 86-519-89883750 Fax: 86-519-89883760 Mobile: 86-18961187950

交货条款及包装

端口: Shanghai Port

付款条款

Letter of credit

Telegraphic transfer

Фотографии

    密码恢复
    要恢复您的密码,请在下面您的电子邮件地址框与您已注册请输入:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    发生了错误。请检查您的电子邮件地址,然后再试一次。
    Ваш новый пароль:

    名称为空


    Выберите страну доставки

    您还没有写消息

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    已发送您的消息!

    親密

    1
    Рынок B2B
    取消
      查看更多
        地區搜索
        全球
        Категории
          产品名称