Analogue Oscilloscope

SpecificationsDescriptionOS-3100G100MHz digital readout oscilloscopeDivision line6'screen with internal division lines: 8x10 divisions(1 division=1CM)Phosphor powderP31 standardAccelerating voltage17KVVertical deflection systemSensitivityCH1 or CH2: 2mV/division to 5V/division +/-3% (11 steps)FrequencyDC-100MHzRise time3.5nsDelay timeRising edge observableMax. Input voltage400V (DC+AC peak value) when≤1KHzInput couplingCH1, CH2, AC, DC, GNDDisplay modeCH1, CH2, CHOP, ALT, ADD, CH2 INVPolar selection+/-(only CH2)X-Y operationX axle and Y axle selectionSensitivityX axle: CH1, CH2 2mV to 5V/div +/-3%,EXT: 0.1V/divY axle: 2mV to 5V/division +/-3%Phase difference3%, DC-50KHzBandwidth of X axleDC-500KHz (-3dB)Horizontal reflection systemTriggering modeNORM , AUTOSweep modeMain scan, continuous delayed scanTriggering sourceCH1, CH2, VERT, EXTTV triggerExternal synchronous separation circuitTrigger level AUTO NORMAdjustable range Automatically synchronized to trigger signal +/-4 divisionsSlope+/-Scan timeA: 50ns/division to 5s/division B: 50ns/division to 50s/divisionAccuracyx1:10ºC to 35ºC+/-3%;0ºC to 50ºC+/-4% x10:10ºC to 35ºC+/-4%;0ºC to 50ºC+/-6%Scan expansion widthx10Maximum scan50nsHOLD OFF timeAdjustableDelay time1us to 5sReadout timeVertical axle: V/DIV, UNCAL, probe factor Scan speed: S/DIV, UNCAL, MAGCursor readout functionΔV, ΔT, Δ1/TCorrection waveformFrequency: 1KHz 20% Voltage: 0.5V 1%Power supply220V/110V +/-10%; 50/60HzDimensions450(W) x 150(H) x 310(D)mmWeight9kgEnvironmental TemperatureDuring operation: 0ºC to 40ºC Safe operation temperature: 10ºC to 35ºC Storage temperature: -20ºC to 70ºCHumidityMeasurement: 35-85%RH Storage: 45-85%RHSpecifications subject to change for product improvement without prior notice.