Aluminum Conductor Steel Reinforced(ACSR)

AAC AAAC conductor Application: Conductor(AAC and ACSR) have been widely used in power transmission lines with various voltage,because they have such good characteristics as simple structure,convient installation and maintenance,low cost large transmission capacity. Material Standard: 1) The hard aluminum conductor used for AAC and ACSR conforms to the standard GB/T 17048-1997 (equivalent to IEC 60889:1987) 2) The zinc coated steel wire used for ACSR confirms to IEC 60888:1987 3) Production can be arranged according to customers requirement for material standard,etc. 4) We can also produce according to the Standard of BS215,ASTM B232,DIN48204 AAAC(GB1179-83)LJ,LJX 3 (Table 3) / Norminal cross section aluminium/steel (mm2) / Structure (no./diameter) (mm) Outer diameter (mm) 20 D.C. resisture at 20 (Ω/km) Calculated breaking load (N) Calculated weight (kg/km) Delivery length ≥ continuous capacity (A) Aluminium Steel 10/2 6/1.50 1/1.50 4.50 2.706 4120 42.9 3000 87 16/2 6/1.85 1/1.85 5.55 1.799 6130 65.2 3000 110 25/4 6/2.32 1/2.32 6.96 1.131 9290 102.6 3000 125 35/6 6/2.72 1/2.72 8.16 0.8230 12630 141.0 3000 145 50/8 6/3.20 1/3.20 9.60 0.5946 16870 195.1 2000 212 50/30 12/2.32 7/2.32 11.60 0.692 42620 372.0 3000 250 70/10 6/3.80 1/3.80 11.40 0.4217 23390 2.2 2000 255 70/40 12/2.72 7/2.72 13.60 0.4141 58300 511.3 2000 340 95/15 26/2.15 7/1.67 13.61 0.3058 35000 380.8 2000 350 95/20 7/4.16 7/1.85 13.87 0.3019 37200 408.9 2000 360 95/55 12/3.20 7/3.20 16.00 0.2992 78110 707.7 2000 420 120/7 18/2.90 1/2.90 14.50 0.2422 27570 379.0 2000 380