Air source heat pump

air source heat pump Optimised use of Heat Pump technologyHeat pumps are inherently clean and reliable, and traditionally use water to water or air to air technology. our air to watersystem, however, represents the best of both technologies,combining the accessibility of air as the heat source, low investment cost, emission free operation, easy installation and maintenance, with the comfort of using a water based heating system.Mainly Composing PartsHeat pump mainly consist of a compressor, fan(applicable to air to water), evaporator ,condenser, and expansion valve (or capillary).Working PrincipleHeat pump is a promising technology that used the same mechanical principles as refrigerators and air conditions to generate hot water.The heat pump works by extracting heat from the surrounding air/water/soil and using it to heat low pressure liquid refrigerant in the heat pumps evaporator, vaporizing the liquid.The refrigerant then passes through the compressor, which raises the refrigerant pressure and thus the temperature as well. The heated refrigerant gas passed through the heat pump condenser,where is gives off its heat to the water and condenses back into the liquid state.The liquid refrigerant then passed through an expansion valve or capillary where the pressure is reduced and the cycle starts over.Energy Saving Compared to conventional heated equipments such as electricity resistance heater, gas/oil boiler and solar heater, a heat pump operates as a cost as little as 25%Environment Friendly A heat pump will not release harmful materials into the nature. Also using heat pump as a heating solution will greatly reduce the emission of carbon dioxide.Wide Range of ApplicationsHeat pump is an optimal house heating and domestic hot water heating solution in residential and a variety of commercial applications. It is also widely used in pool water heating industry.