A10Ex Solvent Recycling Unit

Calstar solvent recovery still Using the distillation principle, Calstar solventrecycling unit separates the contaminants from the original solvent to allow its re-use. Calstar solvent recycling unit is distiller which allows the recycling and the re-use of degreasing and washing solvents. Through a simple distillation process, they separate the contaminants (resins, polymers, pigments, paints, oils, etc.) from the original solvent. The boiling of the solvent is accomplished by a peripheral heating jacket filled with diathermic oil, heated by an electrical element. The vapours are then convoyed to a condenser cooled by air. The condensed solvent is collected in a tank, for its reuse Functioning The solvent to be reclaimed is poured into the stainless steel tank and brought to a boil. The vapours (volatile share), separated from the polluting substances, like ink, paint, grease, pigments, resin (non-volatile share), pass through the cooling battery, where they are condensed. Finally they flow down into the collecting tank. The residuals inside the tank can be removed by the pivoting system or by using the special distillation bags, which enable an easier tank cleaning. Used for Calstar solvent recycling unit is used for recovery the wastesolvent resulting from the following: automobile manufacturing and repair industry; electronic products manufacturing industry; precision instruments and hardware manufacturing industry; sports equipment manufacturing industry; shoe material industry; plastic materials; printing industry; manufacture of chemical coatings; FRP products industry; jewelry industry; optical products; furniture manufacturing industry etc. Type Volume(L)Temperature(°C)Voltage(ACV)Power(K)Dimension(mm)Weight(Kg)A10Ex10 50-210 220V 2.0655*505*1050 62