800W switching power supply(S-800series)

800W Switching power supply Competitivedprice and high reliability105oC Output capacitorAC input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the AC input impact effeciticly With short-circuit and overload protection Compact size, light weight 100% full-load burn-in test Installed with EMI filter, minimum waveModelS-800-12S-800-13.5S-800-15S-800-24S-800-27S-800-48DC output voltage12V13.5V15V24V27V48VOutput voltage range(Note:2)±1%±1%±1%±1%±1%±1%Rated output current66A59A53A33A30A16AOutput current range0-66A0-59A0-53A0-33A0-300-16AWave and noise(Note:3)150mVp-p150mVp-p240mVp-p240mVp-p480mVp-p480mVp-pInlet stability(Note:4)±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%Load stability(Note:5)±5%±5%±0.5%±0.5%±0.5%±0.5%DC output power800W800W800W800W800W800WEfficiency80%81%81%86%86.5%87%Adjustable range for DC voltage±10%±10%±10%±10%±10%±10%Input current5.5A/230VAC inrush current50A/230VLeakage current<3.5mA/240VACOverload protection105% 135% Type: pulsing hiccup shutdown Reset: auto recoveryOver-voltage protection13.8v-16.2v,15.5v-18.2v,18-21v,27.6-32.4v,31-36.5v,57.6-67.2vHigh-temperature protection≥70°c(0 50°c)Temperature Coefficient±0.03%/°c(0 50°c)Setup, rise , hold up time1.5s, 50ms, 20msVibration10 500Hz, 2G 10min,/1cycle, Period for 60min, Each axesWithstand voltageInput and output internal: 1.5KvAC, Input and enclosure:1.5KvAC, Output and enclosure:0.5KvACWorking temperature and humidity-10°c +60°c(Refer to output derating curve), 20% 90%RHWeight2.5KgsSafety standardsMeet UL 1950 requirement (Not apply for the mark)EMC standardsCISPR22(EN55.22), IEC1000-4,2,3,4,5,6,8,11IEC1000-3-2Note: 1. The testing condition for the paramenter above is: 230VAC input, rated load, 25°c 70% RH. Temperatuer. 2. Error: include the setting error, line stability and load stability.(Note:5) 3. Wave test: adopting "A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 4. Inlet woltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0%to100%