74LVC1G08GV - Single 2-input AND gate - NXP Semico

Philips Semiconductors Product specification Single 2-input AND gate 74LVC1G08 FEATURES · Wide supply voltage range from 1.65 V to 5.5 V · High noise immunity · Complies with JEDEC standard: – JESD8-7 (1.65 V to 1.95 V) – JESD8-5 (2.3 V to 2.7 V) – JESD8B/JESD36 (2.7 V to 3.6 V). · ±24 mA output drive (VCC = 3.0 V) · CMOS low power consumption · Latch-up performance £250 mA · Direct interface with TTL levels · Inputs accept voltages up to 5 V · ESD protection: HBM EIA/JESD22-A114-B exceeds 2000 V MM EIA/JESD22-A115-A exceeds 200 V. · Multiple package options · Specified from -40 °C to +85 °C and -40 °C to +125 °C. DESCRIPTION The 74LVC1G08 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Input can be driven from either 3.3 V or 5 V devices. These features allow the use of these devices in a mixed 3.3 V and 5 V environment. Schmitt trigger action at all inputs makes the circuit tolerant for slower input rise and fall time. This device is fully specified for partial power-down applications using Ioff. The Ioff circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. The 74LVC1G08 provides the single 2-input AND function. QUICK REFERENCE DATA GND = 0 V; Tamb = 25 °C; tr = tf £ 2.5 ns. Notes 1. CPD is used to determine the dynamic power dissipation (PD in mW). PD = CPD ´ VCC 2 ´ fi ´ N + S(CL ´ VCC 2 ´ fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in Volts; N = total load switching outputs; S(CL ´ VCC 2 ´ fo) = sum of the outputs. 2. The condition is VI = GND to VCC. SYMBOL PARAMETER CONDITIONS TYPICAL UNIT tPHL/tPLH propagation delay inputs A, B to output Y VCC = 1.8 V; CL = 30 pF; RL = 1